#include <bl0940.h>

Inheritance diagram for esphome::bl0940::BL0940:

Public Member Functions
void	set_voltage_sensor (sensor::Sensor *voltage_sensor)

void	set_current_sensor (sensor::Sensor *current_sensor)

void	set_power_sensor (sensor::Sensor *power_sensor)

void	set_energy_sensor (sensor::Sensor *energy_sensor)

void	set_internal_temperature_sensor (sensor::Sensor *internal_temperature_sensor)

void	set_external_temperature_sensor (sensor::Sensor *external_temperature_sensor)

void	set_legacy_mode (bool enable)

void	set_read_command (uint8_t read_command)

void	set_write_command (uint8_t write_command)

void	set_current_reference (float current_ref)

void	set_energy_reference (float energy_ref)

void	set_power_reference (float power_ref)

void	set_voltage_reference (float voltage_ref)

void	set_current_calibration_number (number::Number *num)

void	set_voltage_calibration_number (number::Number *num)

void	set_power_calibration_number (number::Number *num)

void	set_energy_calibration_number (number::Number *num)

void	reset_calibration ()

void	loop () override

void	update () override

void	setup () override

void	dump_config () override

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms.

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object.

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor.

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message=nullptr)

void	status_set_warning (const LogString *message)

void	status_set_error (const char *message=nullptr)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const LogString *source)
	Set where this component was loaded from for some debug messages.

const LogString *	get_component_log_str () const
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time)

Public Member Functions inherited from esphome::uart::UARTDevice
	UARTDevice ()=default

	UARTDevice (UARTComponent *parent)

void	set_uart_parent (UARTComponent *parent)

void	write_byte (uint8_t data)

void	write_array (const uint8_t *data, size_t len)

void	write_array (const std::vector< uint8_t > &data)

template<size_t N>
void	write_array (const std::array< uint8_t, N > &data)

void	write_str (const char *str)

bool	read_byte (uint8_t *data)

bool	peek_byte (uint8_t *data)

bool	read_array (uint8_t *data, size_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_array ()

int	available ()

void	flush ()

int	read ()

size_t	write (uint8_t data)

int	peek ()

void	check_uart_settings (uint32_t baud_rate, uint8_t stop_bits=1, UARTParityOptions parity=UART_CONFIG_PARITY_NONE, uint8_t data_bits=8)
	Check that the configuration of the UART bus matches the provided values and otherwise print a warning.

Protected Member Functions
float	update_temp_ (sensor::Sensor *sensor, uint16_le_t packed_temperature) const

bool	validate_checksum_ (DataPacket *data)

void	received_package_ (DataPacket *data)

float	calculate_energy_reference_ ()

float	calculate_power_reference_ ()

float	calculate_calibration_value_ (float state)

void	current_calibration_callback_ (float state)

void	voltage_calibration_callback_ (float state)

void	power_calibration_callback_ (float state)

void	energy_calibration_callback_ (float state)

void	reset_calibration_callback_ ()

void	recalibrate_ ()

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

bool	cancel_interval (const char *name)

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

bool	cancel_timeout (const char *name)

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Protected Attributes
sensor::Sensor *	voltage_sensor_ {nullptr}

sensor::Sensor *	current_sensor_ {nullptr}

sensor::Sensor *	power_sensor_ {nullptr}

sensor::Sensor *	energy_sensor_ {nullptr}

sensor::Sensor *	internal_temperature_sensor_ {nullptr}

sensor::Sensor *	external_temperature_sensor_ {nullptr}

number::Number *	voltage_calibration_number_ {nullptr}

number::Number *	current_calibration_number_ {nullptr}

number::Number *	power_calibration_number_ {nullptr}

number::Number *	energy_calibration_number_ {nullptr}

uint32_t	prev_cf_cnt_ = 0

float	max_temperature_diff_ {0}

float	power_reference_

float	power_reference_cal_

float	voltage_reference_

float	voltage_reference_cal_

float	current_reference_

float	current_reference_cal_

float	energy_reference_

float	energy_reference_cal_

float	current_cal_ {1}

float	voltage_cal_ {1}

float	power_cal_ {1}

float	energy_cal_ {1}

uint8_t	read_command_

uint8_t	write_command_

bool	legacy_mode_enabled_ = true

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
const LogString *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bits 5-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

Protected Attributes inherited from esphome::uart::UARTDevice
UARTComponent *	parent_ {nullptr}

Detailed Description

Definition at line 37 of file bl0940.h.

Member Function Documentation

◆ calculate_calibration_value_()

float esphome::bl0940::BL0940::calculate_calibration_value_ ( float state )

protected

Definition at line 127 of file bl0940.cpp.

◆ calculate_energy_reference_()

float esphome::bl0940::BL0940::calculate_energy_reference_ ( )

protected

Definition at line 121 of file bl0940.cpp.

◆ calculate_power_reference_()

float esphome::bl0940::BL0940::calculate_power_reference_ ( )

protected

Definition at line 116 of file bl0940.cpp.

◆ current_calibration_callback_()

void esphome::bl0940::BL0940::current_calibration_callback_ ( float state )

protected

Definition at line 147 of file bl0940.cpp.

◆ dump_config()

void esphome::bl0940::BL0940::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 244 of file bl0940.cpp.

◆ energy_calibration_callback_()

void esphome::bl0940::BL0940::energy_calibration_callback_ ( float state )

protected

Definition at line 162 of file bl0940.cpp.

◆ loop()

void esphome::bl0940::BL0940::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 31 of file bl0940.cpp.

◆ power_calibration_callback_()

void esphome::bl0940::BL0940::power_calibration_callback_ ( float state )

protected

Definition at line 157 of file bl0940.cpp.

◆ recalibrate_()

void esphome::bl0940::BL0940::recalibrate_ ( )

protected

Definition at line 168 of file bl0940.cpp.

◆ received_package_()

void esphome::bl0940::BL0940::received_package_ ( DataPacket * data )

protected

Definition at line 204 of file bl0940.cpp.

◆ reset_calibration()

void esphome::bl0940::BL0940::reset_calibration ( )

Definition at line 129 of file bl0940.cpp.

◆ reset_calibration_callback_()

void esphome::bl0940::BL0940::reset_calibration_callback_ ( )

protected

◆ set_current_calibration_number()

void esphome::bl0940::BL0940::set_current_calibration_number ( number::Number * num )

inline

Definition at line 66 of file bl0940.h.

◆ set_current_reference()

void esphome::bl0940::BL0940::set_current_reference ( float current_ref )

inline

Definition at line 59 of file bl0940.h.

◆ set_current_sensor()

void esphome::bl0940::BL0940::set_current_sensor ( sensor::Sensor * current_sensor )

inline

Definition at line 41 of file bl0940.h.

◆ set_energy_calibration_number()

void esphome::bl0940::BL0940::set_energy_calibration_number ( number::Number * num )

inline

Definition at line 69 of file bl0940.h.

◆ set_energy_reference()

void esphome::bl0940::BL0940::set_energy_reference ( float energy_ref )

inline

Definition at line 60 of file bl0940.h.

◆ set_energy_sensor()

void esphome::bl0940::BL0940::set_energy_sensor ( sensor::Sensor * energy_sensor )

inline

Definition at line 43 of file bl0940.h.

◆ set_external_temperature_sensor()

void esphome::bl0940::BL0940::set_external_temperature_sensor ( sensor::Sensor * external_temperature_sensor )

inline

Definition at line 49 of file bl0940.h.

◆ set_internal_temperature_sensor()

void esphome::bl0940::BL0940::set_internal_temperature_sensor ( sensor::Sensor * internal_temperature_sensor )

inline

Definition at line 46 of file bl0940.h.

◆ set_legacy_mode()

void esphome::bl0940::BL0940::set_legacy_mode ( bool enable )

inline

Definition at line 54 of file bl0940.h.

◆ set_power_calibration_number()

void esphome::bl0940::BL0940::set_power_calibration_number ( number::Number * num )

inline

Definition at line 68 of file bl0940.h.

◆ set_power_reference()

void esphome::bl0940::BL0940::set_power_reference ( float power_ref )

inline

Definition at line 61 of file bl0940.h.

◆ set_power_sensor()

void esphome::bl0940::BL0940::set_power_sensor ( sensor::Sensor * power_sensor )

inline

Definition at line 42 of file bl0940.h.

◆ set_read_command()

void esphome::bl0940::BL0940::set_read_command ( uint8_t read_command )

inline

Definition at line 55 of file bl0940.h.

◆ set_voltage_calibration_number()

void esphome::bl0940::BL0940::set_voltage_calibration_number ( number::Number * num )

inline

Definition at line 67 of file bl0940.h.

◆ set_voltage_reference()

void esphome::bl0940::BL0940::set_voltage_reference ( float voltage_ref )

inline

Definition at line 62 of file bl0940.h.

◆ set_voltage_sensor()

void esphome::bl0940::BL0940::set_voltage_sensor ( sensor::Sensor * voltage_sensor )

inline

Definition at line 40 of file bl0940.h.

◆ set_write_command()

void esphome::bl0940::BL0940::set_write_command ( uint8_t write_command )

inline

Definition at line 56 of file bl0940.h.

◆ setup()

void esphome::bl0940::BL0940::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 67 of file bl0940.cpp.

◆ update()

void esphome::bl0940::BL0940::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 61 of file bl0940.cpp.

◆ update_temp_()

float esphome::bl0940::BL0940::update_temp_	(	sensor::Sensor *	sensor,
		uint16_le_t	packed_temperature ) const

protected

Definition at line 190 of file bl0940.cpp.

◆ validate_checksum_()

bool esphome::bl0940::BL0940::validate_checksum_ ( DataPacket * data )

protected

Definition at line 47 of file bl0940.cpp.

◆ voltage_calibration_callback_()

void esphome::bl0940::BL0940::voltage_calibration_callback_ ( float state )

protected

Definition at line 152 of file bl0940.cpp.

Field Documentation

◆ current_cal_

float esphome::bl0940::BL0940::current_cal_ {1}

protected

Definition at line 115 of file bl0940.h.

◆ current_calibration_number_

number::Number* esphome::bl0940::BL0940::current_calibration_number_ {nullptr}

protected

Definition at line 95 of file bl0940.h.

◆ current_reference_

float esphome::bl0940::BL0940::current_reference_

protected

Definition at line 109 of file bl0940.h.

◆ current_reference_cal_

float esphome::bl0940::BL0940::current_reference_cal_

protected

Definition at line 110 of file bl0940.h.

◆ current_sensor_

sensor::Sensor* esphome::bl0940::BL0940::current_sensor_ {nullptr}

protected

Definition at line 86 of file bl0940.h.

◆ energy_cal_

float esphome::bl0940::BL0940::energy_cal_ {1}

protected

Definition at line 118 of file bl0940.h.

◆ energy_calibration_number_

number::Number* esphome::bl0940::BL0940::energy_calibration_number_ {nullptr}

protected

Definition at line 97 of file bl0940.h.

◆ energy_reference_

float esphome::bl0940::BL0940::energy_reference_

protected

Definition at line 111 of file bl0940.h.

◆ energy_reference_cal_

float esphome::bl0940::BL0940::energy_reference_cal_

protected

Definition at line 112 of file bl0940.h.

◆ energy_sensor_

sensor::Sensor* esphome::bl0940::BL0940::energy_sensor_ {nullptr}

protected

Definition at line 88 of file bl0940.h.

◆ external_temperature_sensor_

sensor::Sensor* esphome::bl0940::BL0940::external_temperature_sensor_ {nullptr}

protected

Definition at line 90 of file bl0940.h.

◆ internal_temperature_sensor_

sensor::Sensor* esphome::bl0940::BL0940::internal_temperature_sensor_ {nullptr}

protected

Definition at line 89 of file bl0940.h.

◆ legacy_mode_enabled_

bool esphome::bl0940::BL0940::legacy_mode_enabled_ = true

protected

Definition at line 125 of file bl0940.h.

◆ max_temperature_diff_

float esphome::bl0940::BL0940::max_temperature_diff_ {0}

protected

Definition at line 102 of file bl0940.h.

◆ power_cal_

float esphome::bl0940::BL0940::power_cal_ {1}

protected

Definition at line 117 of file bl0940.h.

◆ power_calibration_number_

number::Number* esphome::bl0940::BL0940::power_calibration_number_ {nullptr}

protected

Definition at line 96 of file bl0940.h.

◆ power_reference_

float esphome::bl0940::BL0940::power_reference_

protected

Definition at line 105 of file bl0940.h.

◆ power_reference_cal_

float esphome::bl0940::BL0940::power_reference_cal_

protected

Definition at line 106 of file bl0940.h.

◆ power_sensor_

sensor::Sensor* esphome::bl0940::BL0940::power_sensor_ {nullptr}

protected

Definition at line 87 of file bl0940.h.

◆ prev_cf_cnt_

uint32_t esphome::bl0940::BL0940::prev_cf_cnt_ = 0

protected

Definition at line 101 of file bl0940.h.

◆ read_command_

uint8_t esphome::bl0940::BL0940::read_command_

protected

Definition at line 121 of file bl0940.h.

◆ voltage_cal_

float esphome::bl0940::BL0940::voltage_cal_ {1}

protected

Definition at line 116 of file bl0940.h.

◆ voltage_calibration_number_

number::Number* esphome::bl0940::BL0940::voltage_calibration_number_ {nullptr}

protected

Definition at line 94 of file bl0940.h.

◆ voltage_reference_

float esphome::bl0940::BL0940::voltage_reference_

protected

Definition at line 107 of file bl0940.h.

◆ voltage_reference_cal_

float esphome::bl0940::BL0940::voltage_reference_cal_

protected

Definition at line 108 of file bl0940.h.

◆ voltage_sensor_

sensor::Sensor* esphome::bl0940::BL0940::voltage_sensor_ {nullptr}

protected

Definition at line 85 of file bl0940.h.

◆ write_command_

uint8_t esphome::bl0940::BL0940::write_command_

protected

Definition at line 122 of file bl0940.h.

The documentation for this class was generated from the following files:

esphome/components/bl0940/bl0940.h
esphome/components/bl0940/bl0940.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ calculate_calibration_value_()

◆ calculate_energy_reference_()

◆ calculate_power_reference_()

◆ current_calibration_callback_()

◆ dump_config()

◆ energy_calibration_callback_()

◆ loop()

◆ power_calibration_callback_()

◆ recalibrate_()

◆ received_package_()

◆ reset_calibration()

◆ reset_calibration_callback_()

◆ set_current_calibration_number()

◆ set_current_reference()

◆ set_current_sensor()

◆ set_energy_calibration_number()

◆ set_energy_reference()

◆ set_energy_sensor()

◆ set_external_temperature_sensor()

◆ set_internal_temperature_sensor()

◆ set_legacy_mode()

◆ set_power_calibration_number()

◆ set_power_reference()

◆ set_power_sensor()

◆ set_read_command()

◆ set_voltage_calibration_number()

◆ set_voltage_reference()

◆ set_voltage_sensor()

◆ set_write_command()

◆ setup()

◆ update()

◆ update_temp_()

◆ validate_checksum_()

◆ voltage_calibration_callback_()

Field Documentation

◆ current_cal_

◆ current_calibration_number_

◆ current_reference_

◆ current_reference_cal_

◆ current_sensor_

◆ energy_cal_

◆ energy_calibration_number_

◆ energy_reference_

◆ energy_reference_cal_

◆ energy_sensor_

◆ external_temperature_sensor_

◆ internal_temperature_sensor_

◆ legacy_mode_enabled_

◆ max_temperature_diff_

◆ power_cal_

◆ power_calibration_number_

◆ power_reference_

◆ power_reference_cal_

◆ power_sensor_

◆ prev_cf_cnt_

◆ read_command_

◆ voltage_cal_

◆ voltage_calibration_number_

◆ voltage_reference_

◆ voltage_reference_cal_

◆ voltage_sensor_

◆ write_command_