#include <bme680_bsec.h>

Inheritance diagram for esphome::bme680_bsec::BME680BSECComponent:

Public Member Functions
void	set_device_id (const std::string &devid)

void	set_temperature_offset (float offset)

void	set_iaq_mode (IAQMode iaq_mode)

void	set_state_save_interval (uint32_t interval)

void	set_supply_voltage (SupplyVoltage supply_voltage)

void	set_sample_rate (SampleRate sample_rate)

void	set_temperature_sample_rate (SampleRate sample_rate)

void	set_pressure_sample_rate (SampleRate sample_rate)

void	set_humidity_sample_rate (SampleRate sample_rate)

void	set_temperature_sensor (sensor::Sensor *sensor)

void	set_pressure_sensor (sensor::Sensor *sensor)

void	set_humidity_sensor (sensor::Sensor *sensor)

void	set_gas_resistance_sensor (sensor::Sensor *sensor)

void	set_iaq_sensor (sensor::Sensor *sensor)

void	set_iaq_accuracy_text_sensor (text_sensor::TextSensor *sensor)

void	set_iaq_accuracy_sensor (sensor::Sensor *sensor)

void	set_co2_equivalent_sensor (sensor::Sensor *sensor)

void	set_breath_voc_equivalent_sensor (sensor::Sensor *sensor)

void	setup () override

void	dump_config () override

float	get_setup_priority () const override

void	loop () override

Public Member Functions inherited from esphome::Component
float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message=nullptr)

void	status_set_error (const char *message=nullptr)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages.

const char *	get_component_source () const
	Get the integration where this component was declared as a string.

bool	should_warn_of_blocking (uint32_t blocking_time)

Public Member Functions inherited from esphome::i2c::I2CDevice
	I2CDevice ()=default
	we use the C++ default constructor

void	set_i2c_address (uint8_t address)
	We store the address of the device on the bus.

uint8_t	get_i2c_address () const
	Returns the I2C address of the object.

void	set_i2c_bus (I2CBus *bus)
	we store the pointer to the I2CBus to use

I2CRegister	reg (uint8_t a_register)
	calls the I2CRegister constructor

I2CRegister16	reg16 (uint16_t a_register)
	calls the I2CRegister16 constructor

ErrorCode	read (uint8_t *data, size_t len)
	reads an array of bytes from the device using an I2CBus

ErrorCode	read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device

ErrorCode	read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device

ErrorCode	write (const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a device using an I2CBus

ErrorCode	write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a specific register in the I²C device

ErrorCode	write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
	write an array of bytes to a specific register in the I²C device

bool	read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
	Compat APIs All methods below have been added for compatibility reasons.

bool	read_bytes_raw (uint8_t *data, uint8_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes (uint8_t a_register)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes_raw ()

bool	read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)

bool	read_byte (uint8_t a_register, uint8_t *data, bool stop=true)

optional< uint8_t >	read_byte (uint8_t a_register)

bool	read_byte_16 (uint8_t a_register, uint16_t *data)

bool	write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)

bool	write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)

template<size_t N>
bool	write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)

bool	write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)

bool	write_byte (uint8_t a_register, uint8_t data, bool stop=true)

bool	write_byte_16 (uint8_t a_register, uint16_t data)

Static Public Member Functions
static int8_t	read_bytes_wrapper (uint8_t devid, uint8_t a_register, uint8_t *data, uint16_t len)

static int8_t	write_bytes_wrapper (uint8_t devid, uint8_t a_register, uint8_t *data, uint16_t len)

static void	delay_ms (uint32_t period)

Static Public Attributes
static std::vector< BME680BSECComponent * >	instances

Protected Member Functions
void	set_config_ ()

float	calc_sensor_sample_rate_ (SampleRate sample_rate)

void	update_subscription_ ()

void	run_ ()

void	read_ ()

void	publish_ (const bsec_output_t *outputs, uint8_t num_outputs)

int64_t	get_time_ns_ ()

void	publish_sensor_ (sensor::Sensor *sensor, float value, bool change_only=false)

void	publish_sensor_ (text_sensor::TextSensor *sensor, const std::string &value)

void	snapshot_state_ ()

void	restore_state_ ()

int	reinit_bsec_lib_ ()

void	load_state_ ()

void	save_state_ (uint8_t accuracy)

void	queue_push_ (std::function< void()> &&f)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

bool	cancel_interval (const char *name)

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

bool	cancel_timeout (const char *name)

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Protected Attributes
struct bme680_dev	bme680_

bsec_library_return_t	bsec_status_ {BSEC_OK}

int8_t	bme680_status_ {BME680_OK}

int64_t	last_time_ms_ {0}

uint32_t	millis_overflow_counter_ {0}

int64_t	next_call_ns_ {0}

std::queue< std::function< void()> >	queue_

bool	bsec_state_data_valid_

uint8_t	bsec_state_data_ [BSEC_MAX_STATE_BLOB_SIZE]

ESPPreferenceObject	bsec_state_

uint32_t	state_save_interval_ms_ {21600000}

uint32_t	last_state_save_ms_ = 0

bsec_bme_settings_t	bme680_settings_

std::string	device_id_

float	temperature_offset_ {0}

IAQMode	iaq_mode_ {IAQ_MODE_STATIC}

SupplyVoltage	supply_voltage_

SampleRate	sample_rate_ {SAMPLE_RATE_LP}

SampleRate	temperature_sample_rate_ {SAMPLE_RATE_DEFAULT}

SampleRate	pressure_sample_rate_ {SAMPLE_RATE_DEFAULT}

SampleRate	humidity_sample_rate_ {SAMPLE_RATE_DEFAULT}

sensor::Sensor *	temperature_sensor_ {nullptr}

sensor::Sensor *	pressure_sensor_ {nullptr}

sensor::Sensor *	humidity_sensor_ {nullptr}

sensor::Sensor *	gas_resistance_sensor_ {nullptr}

sensor::Sensor *	iaq_sensor_ {nullptr}

text_sensor::TextSensor *	iaq_accuracy_text_sensor_ {nullptr}

sensor::Sensor *	iaq_accuracy_sensor_ {nullptr}

sensor::Sensor *	co2_equivalent_sensor_ {nullptr}

sensor::Sensor *	breath_voc_equivalent_sensor_ {nullptr}

Protected Attributes inherited from esphome::Component
const char *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bits 5-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t	address_ {0x00}
	store the address of the device on the bus

I2CBus *	bus_ {nullptr}
	pointer to I2CBus instance

Static Protected Attributes
static uint8_t	work_buffer_ [BSEC_MAX_WORKBUFFER_SIZE] = {0}

Detailed Description

Definition at line 37 of file bme680_bsec.h.

Member Function Documentation

◆ calc_sensor_sample_rate_()

float esphome::bme680_bsec::BME680BSECComponent::calc_sensor_sample_rate_ ( SampleRate sample_rate )

protected

Definition at line 83 of file bme680_bsec.cpp.

◆ delay_ms()

void esphome::bme680_bsec::BME680BSECComponent::delay_ms ( uint32_t period )

static

Definition at line 460 of file bme680_bsec.cpp.

◆ dump_config()

void esphome::bme680_bsec::BME680BSECComponent::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 145 of file bme680_bsec.cpp.

◆ get_setup_priority()

float esphome::bme680_bsec::BME680BSECComponent::get_setup_priority ( ) const

overridevirtual

Reimplemented from esphome::Component.

Definition at line 184 of file bme680_bsec.cpp.

◆ get_time_ns_()

int64_t esphome::bme680_bsec::BME680BSECComponent::get_time_ns_ ( )

protected

Definition at line 420 of file bme680_bsec.cpp.

◆ load_state_()

void esphome::bme680_bsec::BME680BSECComponent::load_state_ ( )

protected

Definition at line 519 of file bme680_bsec.cpp.

◆ loop()

void esphome::bme680_bsec::BME680BSECComponent::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 186 of file bme680_bsec.cpp.

◆ publish_()

void esphome::bme680_bsec::BME680BSECComponent::publish_	(	const bsec_output_t *	outputs,
		uint8_t	num_outputs )

protected

Definition at line 381 of file bme680_bsec.cpp.

◆ publish_sensor_() [1/2]

void esphome::bme680_bsec::BME680BSECComponent::publish_sensor_	(	sensor::Sensor *	sensor,
		float	value,
		bool	change_only = false )

protected

Definition at line 430 of file bme680_bsec.cpp.

◆ publish_sensor_() [2/2]

void esphome::bme680_bsec::BME680BSECComponent::publish_sensor_	(	text_sensor::TextSensor *	sensor,
		const std::string &	value )

protected

Definition at line 437 of file bme680_bsec.cpp.

◆ queue_push_()

void esphome::bme680_bsec::BME680BSECComponent::queue_push_ ( std::function< void()> && f )

inlineprotected

Definition at line 95 of file bme680_bsec.h.

◆ read_()

void esphome::bme680_bsec::BME680BSECComponent::read_ ( )

protected

Definition at line 271 of file bme680_bsec.cpp.

◆ read_bytes_wrapper()

int8_t esphome::bme680_bsec::BME680BSECComponent::read_bytes_wrapper	(	uint8_t	devid,
		uint8_t	a_register,
		uint8_t *	data,
		uint16_t	len )

static

Definition at line 446 of file bme680_bsec.cpp.

◆ reinit_bsec_lib_()

int esphome::bme680_bsec::BME680BSECComponent::reinit_bsec_lib_ ( )

protected

Definition at line 495 of file bme680_bsec.cpp.

◆ restore_state_()

void esphome::bme680_bsec::BME680BSECComponent::restore_state_ ( )

protected

Definition at line 481 of file bme680_bsec.cpp.

◆ run_()

void esphome::bme680_bsec::BME680BSECComponent::run_ ( )

protected

Definition at line 209 of file bme680_bsec.cpp.

◆ save_state_()

void esphome::bme680_bsec::BME680BSECComponent::save_state_ ( uint8_t accuracy )

protected

Definition at line 541 of file bme680_bsec.cpp.

◆ set_breath_voc_equivalent_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_breath_voc_equivalent_sensor ( sensor::Sensor * sensor )

inline

Definition at line 58 of file bme680_bsec.h.

◆ set_co2_equivalent_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_co2_equivalent_sensor ( sensor::Sensor * sensor )

inline

Definition at line 57 of file bme680_bsec.h.

◆ set_config_()

void esphome::bme680_bsec::BME680BSECComponent::set_config_ ( )

protected

Definition at line 51 of file bme680_bsec.cpp.

◆ set_device_id()

void esphome::bme680_bsec::BME680BSECComponent::set_device_id ( const std::string & devid )

inline

Definition at line 39 of file bme680_bsec.h.

◆ set_gas_resistance_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_gas_resistance_sensor ( sensor::Sensor * sensor )

inline

Definition at line 53 of file bme680_bsec.h.

◆ set_humidity_sample_rate()

void esphome::bme680_bsec::BME680BSECComponent::set_humidity_sample_rate ( SampleRate sample_rate )

inline

Definition at line 48 of file bme680_bsec.h.

◆ set_humidity_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_humidity_sensor ( sensor::Sensor * sensor )

inline

Definition at line 52 of file bme680_bsec.h.

◆ set_iaq_accuracy_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_iaq_accuracy_sensor ( sensor::Sensor * sensor )

inline

Definition at line 56 of file bme680_bsec.h.

◆ set_iaq_accuracy_text_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_iaq_accuracy_text_sensor ( text_sensor::TextSensor * sensor )

inline

Definition at line 55 of file bme680_bsec.h.

◆ set_iaq_mode()

void esphome::bme680_bsec::BME680BSECComponent::set_iaq_mode ( IAQMode iaq_mode )

inline

Definition at line 41 of file bme680_bsec.h.

◆ set_iaq_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_iaq_sensor ( sensor::Sensor * sensor )

inline

Definition at line 54 of file bme680_bsec.h.

◆ set_pressure_sample_rate()

void esphome::bme680_bsec::BME680BSECComponent::set_pressure_sample_rate ( SampleRate sample_rate )

inline

Definition at line 47 of file bme680_bsec.h.

◆ set_pressure_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_pressure_sensor ( sensor::Sensor * sensor )

inline

Definition at line 51 of file bme680_bsec.h.

◆ set_sample_rate()

void esphome::bme680_bsec::BME680BSECComponent::set_sample_rate ( SampleRate sample_rate )

inline

Definition at line 45 of file bme680_bsec.h.

◆ set_state_save_interval()

void esphome::bme680_bsec::BME680BSECComponent::set_state_save_interval ( uint32_t interval )

inline

Definition at line 42 of file bme680_bsec.h.

◆ set_supply_voltage()

void esphome::bme680_bsec::BME680BSECComponent::set_supply_voltage ( SupplyVoltage supply_voltage )

inline

Definition at line 43 of file bme680_bsec.h.

◆ set_temperature_offset()

void esphome::bme680_bsec::BME680BSECComponent::set_temperature_offset ( float offset )

inline

Definition at line 40 of file bme680_bsec.h.

◆ set_temperature_sample_rate()

void esphome::bme680_bsec::BME680BSECComponent::set_temperature_sample_rate ( SampleRate sample_rate )

inline

Definition at line 46 of file bme680_bsec.h.

◆ set_temperature_sensor()

void esphome::bme680_bsec::BME680BSECComponent::set_temperature_sensor ( sensor::Sensor * sensor )

inline

Definition at line 50 of file bme680_bsec.h.

◆ setup()

void esphome::bme680_bsec::BME680BSECComponent::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 17 of file bme680_bsec.cpp.

◆ snapshot_state_()

void esphome::bme680_bsec::BME680BSECComponent::snapshot_state_ ( )

protected

Definition at line 467 of file bme680_bsec.cpp.

◆ update_subscription_()

void esphome::bme680_bsec::BME680BSECComponent::update_subscription_ ( )

protected

Definition at line 90 of file bme680_bsec.cpp.

◆ write_bytes_wrapper()

int8_t esphome::bme680_bsec::BME680BSECComponent::write_bytes_wrapper	(	uint8_t	devid,
		uint8_t	a_register,
		uint8_t *	data,
		uint16_t	len )

static

Definition at line 454 of file bme680_bsec.cpp.

Field Documentation

◆ bme680_

struct bme680_dev esphome::bme680_bsec::BME680BSECComponent::bme680_

protected

Definition at line 98 of file bme680_bsec.h.

◆ bme680_settings_

bsec_bme_settings_t esphome::bme680_bsec::BME680BSECComponent::bme680_settings_

protected

Definition at line 113 of file bme680_bsec.h.

◆ bme680_status_

int8_t esphome::bme680_bsec::BME680BSECComponent::bme680_status_ {BME680_OK}

protected

Definition at line 100 of file bme680_bsec.h.

◆ breath_voc_equivalent_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::breath_voc_equivalent_sensor_ {nullptr}

protected

Definition at line 133 of file bme680_bsec.h.

◆ bsec_state_

ESPPreferenceObject esphome::bme680_bsec::BME680BSECComponent::bsec_state_

protected

Definition at line 110 of file bme680_bsec.h.

◆ bsec_state_data_

uint8_t esphome::bme680_bsec::BME680BSECComponent::bsec_state_data_[BSEC_MAX_STATE_BLOB_SIZE]

protected

Definition at line 109 of file bme680_bsec.h.

◆ bsec_state_data_valid_

bool esphome::bme680_bsec::BME680BSECComponent::bsec_state_data_valid_

protected

Definition at line 108 of file bme680_bsec.h.

◆ bsec_status_

bsec_library_return_t esphome::bme680_bsec::BME680BSECComponent::bsec_status_ {BSEC_OK}

protected

Definition at line 99 of file bme680_bsec.h.

◆ co2_equivalent_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::co2_equivalent_sensor_ {nullptr}

protected

Definition at line 132 of file bme680_bsec.h.

◆ device_id_

std::string esphome::bme680_bsec::BME680BSECComponent::device_id_

protected

Definition at line 115 of file bme680_bsec.h.

◆ gas_resistance_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::gas_resistance_sensor_ {nullptr}

protected

Definition at line 128 of file bme680_bsec.h.

◆ humidity_sample_rate_

SampleRate esphome::bme680_bsec::BME680BSECComponent::humidity_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 123 of file bme680_bsec.h.

◆ humidity_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::humidity_sensor_ {nullptr}

protected

Definition at line 127 of file bme680_bsec.h.

◆ iaq_accuracy_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::iaq_accuracy_sensor_ {nullptr}

protected

Definition at line 131 of file bme680_bsec.h.

◆ iaq_accuracy_text_sensor_

text_sensor::TextSensor* esphome::bme680_bsec::BME680BSECComponent::iaq_accuracy_text_sensor_ {nullptr}

protected

Definition at line 130 of file bme680_bsec.h.

◆ iaq_mode_

IAQMode esphome::bme680_bsec::BME680BSECComponent::iaq_mode_ {IAQ_MODE_STATIC}

protected

Definition at line 117 of file bme680_bsec.h.

◆ iaq_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::iaq_sensor_ {nullptr}

protected

Definition at line 129 of file bme680_bsec.h.

◆ instances

std::vector< BME680BSECComponent * > esphome::bme680_bsec::BME680BSECComponent::instances

static

Definition at line 60 of file bme680_bsec.h.

◆ last_state_save_ms_

uint32_t esphome::bme680_bsec::BME680BSECComponent::last_state_save_ms_ = 0

protected

Definition at line 112 of file bme680_bsec.h.

◆ last_time_ms_

int64_t esphome::bme680_bsec::BME680BSECComponent::last_time_ms_ {0}

protected

Definition at line 102 of file bme680_bsec.h.

◆ millis_overflow_counter_

uint32_t esphome::bme680_bsec::BME680BSECComponent::millis_overflow_counter_ {0}

protected

Definition at line 103 of file bme680_bsec.h.

◆ next_call_ns_

int64_t esphome::bme680_bsec::BME680BSECComponent::next_call_ns_ {0}

protected

Definition at line 104 of file bme680_bsec.h.

◆ pressure_sample_rate_

SampleRate esphome::bme680_bsec::BME680BSECComponent::pressure_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 122 of file bme680_bsec.h.

◆ pressure_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::pressure_sensor_ {nullptr}

protected

Definition at line 126 of file bme680_bsec.h.

◆ queue_

std::queue<std::function<void()> > esphome::bme680_bsec::BME680BSECComponent::queue_

protected

Definition at line 106 of file bme680_bsec.h.

◆ sample_rate_

SampleRate esphome::bme680_bsec::BME680BSECComponent::sample_rate_ {SAMPLE_RATE_LP}

protected

Definition at line 120 of file bme680_bsec.h.

◆ state_save_interval_ms_

uint32_t esphome::bme680_bsec::BME680BSECComponent::state_save_interval_ms_ {21600000}

protected

Definition at line 111 of file bme680_bsec.h.

◆ supply_voltage_

SupplyVoltage esphome::bme680_bsec::BME680BSECComponent::supply_voltage_

protected

Definition at line 118 of file bme680_bsec.h.

◆ temperature_offset_

float esphome::bme680_bsec::BME680BSECComponent::temperature_offset_ {0}

protected

Definition at line 116 of file bme680_bsec.h.

◆ temperature_sample_rate_

SampleRate esphome::bme680_bsec::BME680BSECComponent::temperature_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 121 of file bme680_bsec.h.

◆ temperature_sensor_

sensor::Sensor* esphome::bme680_bsec::BME680BSECComponent::temperature_sensor_ {nullptr}

protected

Definition at line 125 of file bme680_bsec.h.

◆ work_buffer_

uint8_t esphome::bme680_bsec::BME680BSECComponent::work_buffer_ = {0}

staticprotected

Definition at line 97 of file bme680_bsec.h.

The documentation for this class was generated from the following files:

esphome/components/bme680_bsec/bme680_bsec.h
esphome/components/bme680_bsec/bme680_bsec.cpp

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Member Functions

Protected Attributes

Static Protected Attributes

Detailed Description

Member Function Documentation

◆ calc_sensor_sample_rate_()

◆ delay_ms()

◆ dump_config()

◆ get_setup_priority()

◆ get_time_ns_()

◆ load_state_()

◆ loop()

◆ publish_()

◆ publish_sensor_() [1/2]

◆ publish_sensor_() [2/2]

◆ queue_push_()

◆ read_()

◆ read_bytes_wrapper()

◆ reinit_bsec_lib_()

◆ restore_state_()

◆ run_()

◆ save_state_()

◆ set_breath_voc_equivalent_sensor()

◆ set_co2_equivalent_sensor()

◆ set_config_()

◆ set_device_id()

◆ set_gas_resistance_sensor()

◆ set_humidity_sample_rate()

◆ set_humidity_sensor()

◆ set_iaq_accuracy_sensor()

◆ set_iaq_accuracy_text_sensor()

◆ set_iaq_mode()

◆ set_iaq_sensor()

◆ set_pressure_sample_rate()

◆ set_pressure_sensor()

◆ set_sample_rate()

◆ set_state_save_interval()

◆ set_supply_voltage()

◆ set_temperature_offset()

◆ set_temperature_sample_rate()

◆ set_temperature_sensor()

◆ setup()

◆ snapshot_state_()

◆ update_subscription_()

◆ write_bytes_wrapper()

Field Documentation

◆ bme680_

◆ bme680_settings_

◆ bme680_status_

◆ breath_voc_equivalent_sensor_

◆ bsec_state_

◆ bsec_state_data_

◆ bsec_state_data_valid_

◆ bsec_status_

◆ co2_equivalent_sensor_

◆ device_id_

◆ gas_resistance_sensor_

◆ humidity_sample_rate_

◆ humidity_sensor_

◆ iaq_accuracy_sensor_

◆ iaq_accuracy_text_sensor_

◆ iaq_mode_

◆ iaq_sensor_

◆ instances

◆ last_state_save_ms_

◆ last_time_ms_

◆ millis_overflow_counter_

◆ next_call_ns_

◆ pressure_sample_rate_

◆ pressure_sensor_

◆ queue_

◆ sample_rate_

◆ state_save_interval_ms_

◆ supply_voltage_

◆ temperature_offset_

◆ temperature_sample_rate_

◆ temperature_sensor_