#include <mitsubishi_cn105_component.h>

Inheritance diagram for esphome::mitsubishi_cn105::MitsubishiCN105Component:

Public Member Functions
	MitsubishiCN105Component ()

void	setup () override

void	loop () override

void	dump_config () override

void	set_update_interval (uint32_t ms)

void	set_telemetry_request_min_interval (uint32_t ms)

void	set_remote_temperature (float temperature)

void	clear_remote_temperature ()

void	set_power (bool power_on)

void	set_target_temperature (float target_temperature)

void	set_mode (MitsubishiCN105::Mode mode)

void	set_fan_mode (MitsubishiCN105::FanMode fan_mode)

void	set_vane_mode (MitsubishiCN105::VaneMode vane_mode)

void	set_wide_vane_mode (MitsubishiCN105::WideVaneMode mode)

VaneCall	make_vane_call ()

const MitsubishiCN105::Status &	status () const

bool	is_status_initialized () const

bool	is_telemetry_polling_enabled () const

template<typename F >
void	add_on_status_callback (F &&callback)

template<typename F >
void	add_on_vane_state_callback (F &&callback)

void	publish_status ()

Public Member Functions inherited from esphome::Component
virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

bool	is_idle () const
	Check if this component is idle.

void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const LogString *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning ()

void	status_set_warning (const char *message)

void	status_set_warning (const LogString *message)

void	status_set_error ()

void	status_set_error (const LogString *message)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const char *name, uint32_t length=5000)
	Set warning status flag and automatically clear it after a timeout.

void	status_momentary_error (const char *name, uint32_t length=5000)
	Set error status flag and automatically clear it after a timeout.

bool	has_overridden_loop () const

const LogString *	get_component_log_str () const ESPHOME_ALWAYS_INLINE
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time, uint32_t &threshold_ms_out)

Public Member Functions inherited from esphome::uart::UARTDevice
	UARTDevice ()=default

	UARTDevice (UARTComponent *parent)

void	set_uart_parent (UARTComponent *parent)

void	write_byte (uint8_t data)

void	set_rx_full_threshold (size_t rx_full_threshold)

void	set_rx_full_threshold_ms (size_t time)

size_t	get_rx_full_threshold ()

void	set_rx_timeout (size_t rx_timeout)

size_t	get_rx_timeout ()

void	write_array (const uint8_t *data, size_t len)

void	write_array (const std::vector< uint8_t > &data)

template<size_t N>
void	write_array (const std::array< uint8_t, N > &data)

void	write_str (const char *str)

bool	read_byte (uint8_t *data)

bool	peek_byte (uint8_t *data)

bool	read_array (uint8_t *data, size_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_array ()

size_t	available ()

UARTFlushResult	flush ()

int	read ()

size_t	write (uint8_t data)

int	peek ()

void	check_uart_settings (uint32_t baud_rate, uint8_t stop_bits=1, UARTParityOptions parity=UART_CONFIG_PARITY_NONE, uint8_t data_bits=8)
	Check that the configuration of the UART bus matches the provided values and otherwise print a warning.

Protected Member Functions
void	notify_status_listeners_ ()

Protected Member Functions inherited from esphome::Component
friend	void::setup ()

friend	void::original_setup ()

void	set_component_source_ (uint8_t index)
	Set where this component was loaded from for some debug messages.

virtual void	call_setup ()

void	call_dump_config_ ()

void	enable_loop_slow_path_ ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

bool	set_status_flag_ (uint8_t flag)
	Helper to set a status LED flag on both this component and the app.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t id, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a numeric ID (zero heap allocation).

void	set_interval (InternalSchedulerID id, uint32_t interval, std::function< void()> &&f)

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const char *name)
	Cancel an interval function.

bool	cancel_interval (uint32_t id)

bool	cancel_interval (InternalSchedulerID id)

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t id, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a numeric ID (zero heap allocation).

void	set_timeout (InternalSchedulerID id, uint32_t timeout, std::function< void()> &&f)

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const char *name)
	Cancel a timeout function.

bool	cancel_timeout (uint32_t id)

bool	cancel_timeout (InternalSchedulerID id)

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (uint32_t id, std::function< void()> &&f)
	Defer a callback with a numeric ID (zero heap allocation)

bool	cancel_defer (const char *name)
	Cancel a defer callback using the specified name, name must not be empty.

bool	cancel_defer (uint32_t id)

void	status_clear_warning_slow_path_ ()

void	status_clear_error_slow_path_ ()

Protected Attributes
MitsubishiCN105	hp_

CallbackManager< void()>	status_callback_

LazyCallbackManager< void(const VaneState &)>	vane_state_callback_

Protected Attributes inherited from esphome::Component
uint8_t	component_source_index_ {0}
	Index into component source PROGMEM lookup table (0 = not set)

uint8_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_CS}
	Warn threshold in centiseconds (max 2550ms)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bit 5: Has overridden loop() (set at registration time) Bits 6-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

ComponentRuntimeStats	runtime_stats_

Protected Attributes inherited from esphome::uart::UARTDevice
UARTComponent *	parent_ {nullptr}

Detailed Description

Definition at line 53 of file mitsubishi_cn105_component.h.

Constructor & Destructor Documentation

◆ MitsubishiCN105Component()

esphome::mitsubishi_cn105::MitsubishiCN105Component::MitsubishiCN105Component ( )

inlineexplicit

Definition at line 55 of file mitsubishi_cn105_component.h.

Member Function Documentation

◆ add_on_status_callback()

template<typename F >

void esphome::mitsubishi_cn105::MitsubishiCN105Component::add_on_status_callback ( F && callback )

inline

Definition at line 79 of file mitsubishi_cn105_component.h.

◆ add_on_vane_state_callback()

template<typename F >

void esphome::mitsubishi_cn105::MitsubishiCN105Component::add_on_vane_state_callback ( F && callback )

inline

Definition at line 83 of file mitsubishi_cn105_component.h.

◆ clear_remote_temperature()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::clear_remote_temperature ( )

inline

Definition at line 65 of file mitsubishi_cn105_component.h.

◆ dump_config()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 11 of file mitsubishi_cn105_component.cpp.

◆ is_status_initialized()

bool esphome::mitsubishi_cn105::MitsubishiCN105Component::is_status_initialized ( ) const

inline

Definition at line 76 of file mitsubishi_cn105_component.h.

◆ is_telemetry_polling_enabled()

bool esphome::mitsubishi_cn105::MitsubishiCN105Component::is_telemetry_polling_enabled ( ) const

inline

Definition at line 77 of file mitsubishi_cn105_component.h.

◆ loop()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 28 of file mitsubishi_cn105_component.cpp.

◆ make_vane_call()

VaneCall esphome::mitsubishi_cn105::MitsubishiCN105Component::make_vane_call ( )

inline

Definition at line 73 of file mitsubishi_cn105_component.h.

◆ notify_status_listeners_()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::notify_status_listeners_ ( )

inlineprotected

Definition at line 94 of file mitsubishi_cn105_component.h.

◆ publish_status()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::publish_status ( )

inline

Definition at line 87 of file mitsubishi_cn105_component.h.

◆ set_fan_mode()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_fan_mode ( MitsubishiCN105::FanMode fan_mode )

inline

Definition at line 70 of file mitsubishi_cn105_component.h.

◆ set_mode()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_mode ( MitsubishiCN105::Mode mode )

inline

Definition at line 69 of file mitsubishi_cn105_component.h.

◆ set_power()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_power ( bool power_on )

inline

Definition at line 67 of file mitsubishi_cn105_component.h.

◆ set_remote_temperature()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_remote_temperature ( float temperature )

inline

Definition at line 64 of file mitsubishi_cn105_component.h.

◆ set_target_temperature()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_target_temperature ( float target_temperature )

inline

Definition at line 68 of file mitsubishi_cn105_component.h.

◆ set_telemetry_request_min_interval()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_telemetry_request_min_interval ( uint32_t ms )

inline

Definition at line 62 of file mitsubishi_cn105_component.h.

◆ set_update_interval()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_update_interval ( uint32_t ms )

inline

Definition at line 61 of file mitsubishi_cn105_component.h.

◆ set_vane_mode()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_vane_mode ( MitsubishiCN105::VaneMode vane_mode )

inline

Definition at line 71 of file mitsubishi_cn105_component.h.

◆ set_wide_vane_mode()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::set_wide_vane_mode ( MitsubishiCN105::WideVaneMode mode )

inline

Definition at line 72 of file mitsubishi_cn105_component.h.

◆ setup()

void esphome::mitsubishi_cn105::MitsubishiCN105Component::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 26 of file mitsubishi_cn105_component.cpp.

◆ status()

const MitsubishiCN105::Status & esphome::mitsubishi_cn105::MitsubishiCN105Component::status ( ) const

inline

Definition at line 75 of file mitsubishi_cn105_component.h.

Field Documentation

◆ hp_

MitsubishiCN105 esphome::mitsubishi_cn105::MitsubishiCN105Component::hp_

protected

Definition at line 101 of file mitsubishi_cn105_component.h.

◆ status_callback_

CallbackManager<void()> esphome::mitsubishi_cn105::MitsubishiCN105Component::status_callback_

protected

Definition at line 102 of file mitsubishi_cn105_component.h.

◆ vane_state_callback_

LazyCallbackManager<void(const VaneState &)> esphome::mitsubishi_cn105::MitsubishiCN105Component::vane_state_callback_

protected

Definition at line 103 of file mitsubishi_cn105_component.h.

The documentation for this class was generated from the following files:

esphome/components/mitsubishi_cn105/mitsubishi_cn105_component.h
esphome/components/mitsubishi_cn105/mitsubishi_cn105_component.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ MitsubishiCN105Component()

Member Function Documentation

◆ add_on_status_callback()

◆ add_on_vane_state_callback()

◆ clear_remote_temperature()

◆ dump_config()

◆ is_status_initialized()

◆ is_telemetry_polling_enabled()

◆ loop()

◆ make_vane_call()

◆ notify_status_listeners_()

◆ publish_status()

◆ set_fan_mode()

◆ set_mode()

◆ set_power()

◆ set_remote_temperature()

◆ set_target_temperature()

◆ set_telemetry_request_min_interval()

◆ set_update_interval()

◆ set_vane_mode()

◆ set_wide_vane_mode()

◆ setup()

◆ status()

Field Documentation

◆ hp_

◆ status_callback_

◆ vane_state_callback_